Navigation
Run simulation on HMI and get error "Local subnet is not connected"
Created by: U_31b85f8b-94d8-449b-baeb-fcd187ea9189 at: 4/19/2023 5:59 AM (2 Replies)
Rating 
Thanks 0
3 Entries
| 4/19/2023 5:59 AM | |
|
Posts: 1 Rating:
|
Hi, I am using TIA portal v17, and trying a basic project of HMI, when I start the Simulation it gives me error that " ,HMI_Connection_1: Local subnet is not connected; 1,,,10:30:58 AM", i tried at google but no luck. please guide me how to resolve this error. rest of the code is error free just causing problem when connecting to HMI basic 7". Thankyou ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 04/19/2023 10:40:39New subject after splitting |
|
| 4/20/2023 7:12 AM | |
Joined: 8/3/2009 Last visit: 1/20/2026 Posts: 16644 Rating:
|
Hello U_31b85f8b-94d8-4... Use this Basic FAQ for checking your settings: https://support.industry.siemens.com/cs/de/en/view/109748099 or https://support.industry.siemens.com/cs/ww/en/view/88193789 Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on