TIA PORTAL WINCC V17 TRIAL LICENSE

SP: DEFAULT

UPDT: DEFAULT

WINCC RUNTIME PROFESSIONAL  (PC BASED MULTIUSER)

SERVER: WINDOWS SERVER 2016 STANDARD

CLIENT: W10 PROFESSIONAL

V17.0.0

I've already seen each other device on network from windows explorer network.

Both can ping each other.

 IP addresses are given by a TP-Link router (home use) based on MAC.

The server project is visible from client's Shell

When I used the Auto start I left the server credentials (see below). And the thing on attachment appears when client tries to start.

It says: Please open the project on the server first.

But it's already opened and started.

PC name: B03S001

Server user: Administrador

Pass: Server3

PC name: B03C001

Client user: Admin

Pass: Cliente3

Should I do anything else?

I think I haven't created user groups on client. I might perform this test today. But in the meantime I'd like your help please.

Hi,

Good thing that both PCs see each other in SIMATIC Shell, but have you right click > "Interconnect" from the Client PC in order to start the Runtime for the first time?

Then, if the "Interconnect" ends successfully, you can configure the AutoStart. 

No, I don't remember that I have tried that.

I'll do that and I'll be bringing updates, thanks

I'm keeping my fingers crossed 

Ok I've interconnected client to server and the project was opened.

However it asks for a start picture which I've already selected when editing.

Video how it starts  

Please if you need more information about settings don't doubt asking me

Hi, 

Please see below the possible reasons for this message:

Why do you get the message "Start picture not found" on the client although it has been configured?