Rating 
Thanks 0
4 Entries
| 12/12/2023 10:20 AM | |
Joined: 7/5/2013 Last visit: 1/23/2026 Posts: 3277 Rating:
|
Hi syd_b, did you have a look at Configuration of a Client–Server System with WinCC V7.5? For WinCC Pro it might be pretty much the same. Regards, Frink |
|
Pi is exactly three! |
|
| 12/12/2023 11:26 AM | |
|
Posts: 48 Rating:
|
As in the first reply I have difficulty in finding the manual specifically for the Wincc Professional, but wincc 7.5 manual would be much helpful. Please follow this tutorial if you have additional doubts https://www.youtube.com/watch?v=949xqu3Jj1A Please give rating if my replies are helpful. |
Last edited by: The Helping Hand at: 12/12/2023 11:31:22Video embedded |
|
| 12/19/2023 7:56 AM | |
Joined: 8/3/2009 Last visit: 1/23/2026 Posts: 16661 Rating:
|
hello syd_b As a good start you should configure all your PC stations with this FAQ: https://support.industry.siemens.com/cs/de/en/view/108464289 Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on