U_8bfbf1fa-7ad7-41a6-8770-bf1484a3d663

Hello is there anyway to smoothen the water level operations than using so much clocks?

Learn about positive/negative edge detection -|P|- / -|N|-

Hi

if you need filter data do the following at fixed intervals (you can use cyclic OB to generate flag every let's say 100ms or write code in the said OB)

to filter use following formula

Filtered:=F*Raw+(1.0-Factor)*Filtered;

Filtered must be a STAT / M or DB value (NOT TEMP!!!)
F is filter factor from 0 (cutoff) to 1 (no filter). Lower values = stronger filtering.

Output from formula can be used in program and for hmi.

you can start from factor = 0.1 and update time of 100ms

then adjust filter as needed.