SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Problem With TD 200

3/6/2010 3:13 PM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 9/5/2025 Posts: 116 Rating: (2)	Dear All, We are having S7 2224 With TD 200. We want to add two additional alarm in TD 200. How we can upload program from TD 200. When we are uploading PLC program we are not able to see TD 200 program in wizard. Please tell how we can get program from TD. We are using Microwin 4.0 SP7. regards, Rahul

Suggestion To thank Quote Answer

3/6/2010 10:54 PM	Rate (0)
LostPatrol Posts: 32 Rating: (0)	The program for the TD-200 is embedded with the PLC program. Upload the PLC or find the source PLC and you can config the alarm messages.
LostPatrol Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

3/8/2010 6:18 AM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 9/5/2025 Posts: 116 Rating: (2)	Dera Sir, When we are uploading the program from PLC we are not able to see Existing TD Program.

Suggestion To thank Quote Answer

3/8/2010 10:56 AM	Rate (0)
Robster Gold Member Joined: 5/28/2008 Last visit: 9/15/2025 Posts: 1344 Rating: (141)	Have you setup all parameters in TD200 settings?

Suggestion To thank Quote Answer

3/10/2010 4:45 PM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 9/5/2025 Posts: 116 Rating: (2)	Sir, Its runinng system & we need additional Alarm , thats whya we are uploading the program from PLC but we are not getting TD 200 Configuration.

Suggestion To thank Quote Answer

3/11/2010 1:25 PM	Rate (0)
Robster Gold Member Joined: 5/28/2008 Last visit: 9/15/2025 Posts: 1344 Rating: (141)	YOu have to adjust all parameters in the TD. Like Baudrate, CPU address, Start address of V-Area and so on. You can do it with buttons on the TD.

Suggestion To thank Quote Answer

Share this page:

Share this page on...