I am using COM 143 v1.1 software for CP 143 configuration where we can define the data to write and read did it lies in the CP configuration.what is STF DB editor it is with the COM software ,i wanted to know that how we can configure CP143 for the communcation to WinCC and where we can define the data to read and write from the PLC to HMI

You have any manual on Cp 143 TF,plz i needed urgently ,I have the software just i need to know how to configure the data in CP and I wanted to make communicatiion between Cp 143(S5) and WinCC 7.0 station.On PC side I dont have any problem just I need to know how I configue my data and my S5 CPU is 928(CPU 115/135).