SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

WinAC RTX profibus problem

8/1/2013 9:13 PM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 6/10/2025 Posts: 348 Rating: (10)	Hi, there´s a WinRTX running in a PC with a CP5613 installed. To this CP there are 8 DPslaves. The machine was working until was shutted down and when restart there was no communication. I checked the driversare installed correctly, all Ok. Download again Hardware config but still without communication. I opened configuration console but in modules doesn´t appear the CP5613(done this with dp connector disconnected from CP), cause I wanted to reconfigure connections in Station Configurator Editor. Any ideas what´s happening, how to solved it? Thanks.

Suggestion To thank Quote Answer

8/2/2013 2:48 PM	Rate (0)
taxflor Silver Member Joined: 1/26/2011 Last visit: 11/12/2024 Posts: 243 Rating: (67)	Hello, what do you mean with no communication? Do you have an bus-error? what doyou mean with configuration console? Do you have EWF (enhance write filter) installed and activated? maybe your configurations were reseted. you wrote that you changed some configurations. did you do this after the restart of the system when it no longer worked? or before? greetings bigfoot
	Last edited by: bigfoot at: 8/2/2013 2:53 PM
Suggestion To thank Quote Answer

8/7/2013 12:57 AM	Rate (0)
syd_b Bronze Member Joined: 2/3/2011 Last visit: 6/10/2025 Posts: 348 Rating: (10)	Hi, thanks for response. Problem solved, I uninstalled CP drivers and restart PC. Then configured CP as attached steps, download my HW configuration andProgram blocksand everything works fine. Attachment func=ll&o.pdf (494 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

1/24/2014 8:15 PM	Rate (0)
GrasserF Posts: 340 Rating: (6)	new question is splittet to WinAC (WinLC v4.6) screen was freezed
GrasserF Posts: 340 Rating: (6)
Suggestion To thank Quote Answer

Share this page:

Share this page on...