Hi,

I`m planning to install a Absolute Encoder SSI interface and connect it to 6ES7338-4BC01-0AB0 (SIMATIC S7-300, SIGNAL. MODULE FOR 3 SSI SENSORS FOR READ-IN OF POSITIONING VALUE WITH 2 FREEZE INPUTS , 1 X 20 PIN, SUPPORTS ISOCHRONE MODE)

My question is configuration and logic/programming example. How must I set these up in simatic?
To get the posistion value, how I`m gone use the posistion value in my logic is okay, but I need some help how get things up running to be abel to produce the posistion value from the card.

Thank you :)

Start with https://support.industry.siemens.com/cs/in/en/view/23642062 

And of course check the manual...there is example.

BR

hristo