We are currently in commissioning phase of PCS7 at our plant and we are stucked at a issue regarding RTD Module (7PF01) where we have made connections as per the manual but the desired value is not appearing at the HMI as per the applied resistance (rtd is inserted in temperature bath and a cable is connected to module, as per RTD the temp should be 100 deg but 105 is appearing in the system, when we directly connect the RTD to the terminal it shows perfect 100) there must be some line resistance in the cable but shouldn't the module compensate it?  We have tried to resolve the problem by connecting shield wire to ground as well but the problem didn't resolved. Note that we are wiring 3 wire RTD to the module and in  the hardware configuration we also have selected 3 wire RTD. Your immediate support would he highly appreciated

Dear Usama, 

Did you solve your issue? I keen to know the answer as well as im using the same module in my project.