Dear Every body

i had to change new drive sinamic S120 sigle motor module 6SL3120-1TE21-8AA4 in simotion system but simotion system not recognize it. I already reset button in CPU module.and dowload again source hardware and program of machine.

Please help me.

Thanks

Linh

Hello,

what exactly you mean?
Is the module not displayed in the topology?
Any fault present?
How is the rdy led on the simotion?

Regards

Christoph

ChristophD

Hello,

what exactly you mean?
Is the module not displayed in the topology?
Any fault present?
How is the rdy led on the simotion?

Regards

Christoph

 Dear Chrishtoph,

Ready led is red color.

Module have display in the toppology.

But machine appear error.that module was error can not reconigze.

I already go to safety integrate.=>check box change new drive.

When i turn off machine it not remmember.

Do you have any document relevant to CHANGE NEW DRIVE OF SIMOTION please share to me.

Regard

Linh

Hello,

Does the new module have the exact same MLFB as the old one?

If yes, maybe the comparison feature (p9906) is set to high, so the device is looking for the serial number of the old drive

What is the fault number in the Sinamics part?

Phil

PhilSiemens1

Hello,

Does the new module have the exact same MLFB as the old one?

If yes, maybe the comparison feature (p9906) is set to high, so the device is looking for the serial number of the old drive

What is the fault number in the Sinamics part?

Phil

 

 Hello ,

yes device is looking for the serial number of the old drive.it relevant to P9906.

Everybody

Regard

Linh

Hello ,

one idea is to make shut a power two times. One Power ON is not sufficient. But probably, you have done it.