Hi,

At one of my customers whom has a problem at his line which is not giving the correct metal movement according to the position set point .

İf I gave 3000 mm as Position set point the actual movement is not correct.

The lead red roller diameter is 110 mm.

I put Number of motor revolution 51 because the factor is 51.236...

and the Distance per spindle revolution is 345.71 because of 110 * 22/7 

Could you tell me what is wrong in my setting ?

Thank you very much for your answer..

I will go to site again next week and give you feedback..

Hello Technical Team, 

The Problem was in Gear Box factor was not correct, we have monitored the rotation count of the gear box was not correct so we have got a near results