Good morning, everybody,

Using Lcon libraries for SIMATIC.

I would like to use the openbrake input parameter to control the brake opening of a winder axle, this operation must be performed with the axle disabled.

I did some tests but nothing happens.

Checking the block code "LCon_DriveControl", you can guess that this command goes through bit 15 of STW2, but as you can see in the attachment in the example project here nothing is connected.

Instead, the brake opening connection seems to be prepared in bit 12 of STW1.

You could help me understand what to do.

Thank you

V.Vavassori