Navigation
WinCC Unified Panels: After changing the device the screen didn't scale to the new device
Created by: Henry_TIA at: 11/24/2020 2:46 PM (1 Replies)
Rating 
Thanks 1
2 Entries
| 11/24/2020 2:46 PM | |
Joined: 11/6/2020 Last visit: 11/6/2025 Posts: 14 Rating:
|
I am new to the Unified panels and am trying some things. I tried to create a screen and after that changing the device type. (From a MTP1500 to a MTP700). According to the information about the Unified panels is it easy to switch between different Unified types. (It doesn't matter if it is a MTP1500 or MTP700). After changing the device the screen didn't scale to the new device. Am I doing something wrong, is this functionality not implemented at the moment or are the Unified Panels not as scalable as promised? ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 11/25/2020 08:34:05New subject after splitting |
|
| 11/25/2020 9:37 AM | |
|
Posts: 38 Rating:
|
i can remember to have read sth about "scaling is not implemented yet", but im not that sure. |
This contribution was helpful to
|
|
Follow us on