Open a empty network projekt.

Then click on "Go Online".

Then search LSC for all reachable LOGO!s and shows you the LOGO!s.

By a LOGO! without display is a factory reset only possible via LSC.

But when LSC doesn't know the IP address of the LOGO!, we will done?

What is the IP address and the subnet mask of your PC?
Is the LOGO! a new (untouched) device?

We need more informations ....

Then can have the LOGO! a IP address ???.???.???.???

Have you buy the LOGO! via ebay or other?

Then have you a problem ...

LadislavH

hi ixo, thanks for the quick reply, 
but unfortunately the tutorial didn't help.

 That says that the LOGO! isn't in the same subnet as your PC.

You can  make this:

Make a little program e.g. I1 to Q1.

In the properties of the file set the IP address and the subnet mask in a range of your PC.

Then save the program as a ".bin" file on a mSD card.

Place the mSD card in the LOGO! and start it new (power supply).

The next problem is:

A LOGO! with the article number can be:

A LOGO! 0BA8.Standard
- or
a LOGO! 8.1 (LOGO!8.FS4).

If you want I can make you the ".bin" files for both.

LadislavH

The IP address is 192.168.28.11  
and subnet mask 255.255.255.0 
Logo! someone has programmed before

I will add that the status LED is red (STOP)​

The LED is red possible the LOGO! has no program.

In attachment the two bin files.

Use a file after the after.