Duckzelf

The light is still not shutting of at 23....

The only possible way for the light to stay on is the network input with V30.0 and it seems to be, you don't want to upload your complete program to help you, find out the fault.

Delete the network input for a test und you will see, the light goes off at 23:00h.

You also can start a online test just before 23:00h and have a look to the status of the network input. I think, V30.0 is set at 23:00h and then the output of the RS block has no effect.

If you use VM memory, then prevent overlapping of addresses. If you use LWE webserver, then a button will only set V30.0 and stay on. In this case connect a low signal to a network output with the same address V30.0 in the Logo program.

Regards, Scorp

ixo65

I can only comment on my proposed program, and it will work as you wish.

You are not writing anything to your network input with the address V30.0.

Therefore I know what influence he has on my proposal.

 Still dont get it workingo

 Tried it. buit the lights are off in the evening then. i want the lights go on at sunset and go off at like 23 o clock..

ixo65

You didn't changes the program as I say.

In attachment a corrected version.