Please help me !!!!!

1) I want to see the real time current( all the 3 phases) of all the motors ( alomst 25-30 nos)having simocode prowith1 SingleHMI ( which will be mounted on MCC Panel)

SIMOCODE pro has facilty to transmit cyclic and acyclic data and have a profibus port.

Now my question is , please suggest a suitable HMI and software for the same.

SIMOCODE is communicating with ABB make PLC.

Hello Valli;

When you setup a slave on a Profibus network, the data it exchanges with the Profibus master will be collected in the master's I/O memory area; it will become part of the master's image table.
The best way to display this information is to use an HMI that is compatible with the master's I/O addressing and communications. Either choose an ABB-provided operator panel, or a third-party HMI that can communicate wuith an ABB controller; connect the chosen panel to the ABB controller that acts as a Profibus master to your Simocode units, and dfisplay the tags you need to show.
For example:
-ABB-made HMI (one amongst others, look on the ABB site):
http://www.abb.com/product/seitp334/57b9079d0b665d91c12570ad004375d0.aspx
-Third-party units (again, no preference, just find one of your liking on the net):
Beijer Electronics:
http://www.beijerelectronics.com/web/beijer_electronics.nsf/AllDocuments/756DA5324F96E20FC1256FBA0052AEE9
-Use anOPC driver to an HMI you know and use, to establish comms with the ABB driver.

Hope this helps,
Daniel Chartier

What is WIN AC MP can i use the same here for this case.