------------------------------------------------------------------------------------------
Split from HMI is indicating a fault with a code ST 763.

Hello,

good help if you need it, can be from you if you can translate that texts for us or set your HMI to english maybe, also that texts are hard to read for me. Really hard to sugest something...

Hello Faisal Maximus;

If it can help,here is the translation from the alarm codes shown in the O.P.'s screenschot:

07/09 11:40:23 Adminitstrator            PRI-SHD: Remote STOP from control unit

07/09 13:52:59 Administrator            ALM:     Group Fault Circuit breaker trip

07/09 16:35:17 Administrator            Group status from WECS, Shutdown mode IS879

These look to be alarm messages from the Wartiila system, not from the Siemens CPU. You should contact Wartsila directly, or the OEM that installed the generator system.You might have better help from them.

Hope this helps,

Daniel Chartier