Добрый день.

У нас установлен PowerCC.

Я знаю, что его лишили поддержки. Но, пожалуйста, помогите. Как я могу отправить команду телеуправления из другого центра управления на коммутатор, подключенный к PowerCC. ICCP не поддерживается другим центром.

Hi Alex_Sheva,

Please try to discuss your question in English language. This is an international community and we try to focus on one language. Posting in English will help you to get more response to your question.

This is the translation of your question:

Alex_Sheva

Good afternoon.

We have PowerCC installed.

I know it has been withdrawn from support. But please help. How can I send a telecontrol command from another control center to a switch connected to PowerCC. ICCP is not supported by the other center.

Best regards,
The Helping Hand

We have PowerCC  installed.

I know he has been withdrawn from support. But please help. How can I send a telecontrol command from another control center to a switch connected to the PowerCC. ICCP is not supported by another center.

Alex_Sheva

We have PowerCC  installed.

I know he has been withdrawn from support. But please help. How can I send a telecontrol command from another control center to a switch connected to the PowerCC. ICCP is not supported by another center.

hi,

I don´t know PowerCC . And obviously I ´m not the only one.  I assume it is a kind or HMI-SW from Energy-sector, right?

What do you mean by "ICCP is not supported by another center"?

When you tell us what PowerCC is, the moderator can switch this conversation into a more suitable conference, which is subscribed by experts to this topic.

the more we know, the more we can help,

regards,

Hello alex;

mopS04's post triggered n old memory, from about 10 years ago, on the forum:

https://support.industry.siemens.com/tf/ww/en/posts/siemens-spectrum-scada/79933

From the discussion above, you ca see that at that time information on PowerCC (from the Spectrum SCADA range, today evolved into Power 7 I believe), it was relatively difficult for participants in the Siemens Industry forum (this section f Simenes company) to find documentation on Power CC, developped by another divison of Siemens. See MikeJ's post in the thread mentionned.

These days, Siemens Energy presents Power 7 as an Advanced Transmission Management System,, as you can see here:

https://new.siemens.com/global/en/products/energy/energy-automation-and-smart-grid/grid-control.html

The same webpage offers a support link, at the bottom of the page, which you could use to ask questions on PowerCC. I do do know how current their support staff wll be with old software, but it the best you could try.

Hope this helps,

Daniel Chartier