Hi,

I need to generate signals at the output of a plc s7-1500 to simulate the signals of a rotary encoder usign digital output that wired to "Pepperl & Fuchs" module , i want to know how to parameter the output of my plc to work with high speed frequency , it possibile to generate Quadrature Signal with 50 hz frequency.

i have found same parameter of 6ES7 132-6BH00-0BA0 in Tia portal about OB and Process image , what is this for ?

Thanks

Mehdi_Mido

Hi,

I need to generate signals at the output of a plc s7-1500 to simulate the signals of a rotary encoder usign digital output that wired to "Pepperl & Fuchs" module , i want to know how to parameter the output of my plc to work with high speed frequency , it possibile to generate Quadrature Signal with 50 hz frequency.

i have found same parameter of 6ES7 132-6BH00-0BA0 in Tia portal about OB and Process image , what is this for ?

Thanks

Hi,

You can generate pulse signals similar to encoder pulses using high-speed output modules.

For ET200SP, you can use 6ES7132-6BD20-0DA0

thank you for your replay , but i want to know if is possibile using this module (6ES7 132-6BH00-0BA0) to generate the signal updating image process using same interrupt OB35 (20/50 ms) , without buying new module , because purpose of this application is just to check if the "Pepperl & Fuchs" is programmed correctly but sending him same frequency signal and read back feedback.