Guest

HI,we are from CCC ,Qatar,
Our concern that we are using two Micromaster 430,invertor have profibus card, we have to couple this VFD with our BMS system and its protocol is in BACNet IP,so how we can connect to BMS?
Where we will get the mapping address and details of Micromaster 430 status in profibus.
Regards,

As previously stated above, Profibus to BACnet converters are available.

Modules for DeviceNet, CANopen were manufactured, following the format of the Profibus module.

DeviceNet 6SE6400-1DN00-0AA0

CANopen 6SE6400-1CB00-0AA0

An RS485 communication is available at terminals 29/30, (29 P+, and 30 N-) using USS protocol.

Hope this helps.

Tractor

@ Kakashi_Hatake 

@ Tractor 

You are replying to post which too old i.e. of the year 2013.