Hi everyone,

      I have problem for pdm integration with step7 project. PDM version is V9.1 and license is everything is Okay .

Problem: Hardware configuration All PA Instrument showing healthy.

While opening PDM software from step7 configuration  and it's opened. But .. instrument is showing fault symbol..  error is showing not connected to target device..

ANY ONE PLEASE HELP 

------------------------------------------------------------------------------------------
Split from Integration of Step7 Project into PDM.

Hi,

Make sure that all the PA devices are downloaded.

Check below points to know the actual status of configured devices,

Solution 1:

1.Open Hardware Configuration window in SIMATIC Manager.

2. Select the network where PA devices are connected.

3. Right Click->SIMATIC PDM -> Start life list.

Life List window will appear

4. Click on Scan button once in Life list window.

Window lists all the connected devices with addresses

Solution 2:

1.Open PDM view of a device and then go to device "object properties"

2. Select diagnostic tab and click on update diagnostic, Here you get the devices and communication status.

Refer attached screenshots.

Hope it helps you!