I am trying to upload a LWE project to my LOGO, but I just get this really unhelpful message box:

When I try "Deploy to SD Card" it finishes, but there are no files on the SD Card (only _dirmeta.dat). I also formatted it to FAT32 and it's only 4 GB.

When I go into Diagnostics --> Hardware --> SD Card it says "Micro SD Card: OK"

LOGO BM 24CE (6ED1052-1CC08-0BA0) 

Firmware: 1.82.01

LWE V1.0.1

Î finally installed LWE 1.1.0 but still can't upload or write to SD Card .

Tried another SD Card: LOGO couldn't read it 

Tried another SD Card: now LWE gives me this error message:

I don't have a clue what I am doing wrong, also I don't have any more SD Cards..

Turns out it was me who was the problem..

I thought UPLOAD would UPLOAD the project to LOGO, but it means UPLOADING the project to your PC??? This is very confusing in my opinion.

I have to hit DOWNload to DOWNLOAD the project onto the LOGO?? seems very unintuitive, thanks anyways..

leotr

Turns out it was me who was the problem..

I thought UPLOAD would UPLOAD the project to LOGO, but it means UPLOADING the project to your PC??? This is very confusing in my opinion.

I have to hit DOWNload to DOWNLOAD the project onto the LOGO?? seems very unintuitive, thanks anyways..

Leotr is right with his opinion and the naming for Up- and Download is the wrong way round, I've stepped in the same pitfall and spent hours for troubleshooting, assuming the error comes from SD-card formatting etc  and finally found this post.