Hi Every One

We have a CNC turning Machine with 828 Siemens Control.

Machine is stop due to Ground Fault and alarm no  25201 ( Axis MY Faulty), i, we found where is fault. so we replaced Motor (1FK7060-5AF71-1FG3) and Servo Drive( 1P 6SL3121-1TE15-0AA3) with New one Drive and motor . But New Motor , new Drive ( 1P 6SL3121-1TE21-8AA3) are differ with old Motor and  Drive.

so another massage appear Alarm no (207815 Drive : power unit has been changed )

230885  : Axis MY Servo_33:5 (5):

CU Drive-CLiQ9CU): Cyclic data transfer error, Component Number"5, Fault Cause 3.3

207800  : Axis MY Servo_33:5 (5):

Drive ; no power Unit is Present

How we can fixed the problem

how we can set parameter of Drive and motor data in System.

with Regard

M Shafay

Hi Sir 

Thanks a lot

Can you give me short procedure how to configure new servo drive and motor.

Thanks in advance

Hi Sir 

I am grate thankful to you that you give me guide line.