Rating 
Thanks 1
3 Entries
| 5/20/2022 10:50 AM | |
Joined: 1/15/2007 Last visit: 1/7/2026 Posts: 53 Rating:
|
Hi recommend a working OPC Bacnet server for communication with PXC100 controllers |
| 5/20/2022 12:38 PM | |
|
Posts: 387 Rating:
|
Dear forum member, You may use Desigo CC Connect for this purpose. Desigo CC™ Connect is a gateway between systems with different protocols. Desigo CC™ Connect as a software platform, incorporates the industry’s latest software technology to integrate BACnet, Modbus, KNX, SNMP, S7 and various disciplines (for example, Danger Management), into a common object model and is supported by a powerful computational engine. Further information can be found in the Desigo CC standard documentation, e.g.: https://sid.siemens.com/r/A6V11852735/16701408651_16702379147__en-US_16701413899 Best regards, Paul |
This contribution was helpful to
|
|
| 5/20/2022 4:29 PM | |
|
Joined: 1/15/2007 Last visit: 1/7/2026 Posts: 53 Rating:
|
Hi, Paul This is a good option at the hardware level , but I want to type PXC100--->OPC Bacnet ip--->WinCC TIA Unified |
Follow us on