Hi,

   I have MasterDrive MC 6SE7016-OTP70-Z  which has to communicated through Profibus DP to S7 400.

 Share the tips or example how can i  do it ?

Thanks 

Hello pratik;

In this discussion you will find links that could help you out with a Mastetdrve MC  with CBP2 communication board for Profibus-DP. 

https://support.industry.siemens.com/forum/ca/en/posts/need-to-connect-an-s7-400-to-a-masterdrive-test-rig-with-a-cbp2/46743/?page=0&pageSize=10

If you need further documentation on the subject, use the search box at the right of this page  with a search term such as "CBP2".

Hope this helps,

Daniel Chartier

Hi,

  I have MasterDrive MC which was mentioned. Lease tell me which GSD i have to use to program that drive?

Thanx