Hello!

I try to install hotfix 4 on newly installed step 7 v 5.7 and get this error. Reinstalling step 7 does not fix this error. The same error if you install hotfix 1 and 3

------------------------------------------------------------------------------------------
Split from "The file RS.EXE has an invalid signature. Installation cannot be continued.".

Andreywys

Hello!

I try to install hotfix 4 on newly installed step 7 v 5.7 and get this error. Reinstalling step 7 does not fix this error. The same error if you install hotfix 1 and 3

 

SIMATIC products

Automation License Manager Professional 2021 V6.0 + SP9 + Upd2 06.00.09.02_01.01.00.02 K6.0.9.2

S7 F ConfigurationPack V5.5 + SP13 + Upd1 K5.5.13.1_1.1.0.2 K5.5.13.1

S7-PCT V3.5 SP2 K3.5.2.0_1.18.0.1 K3.5.2.0

S7-PDIAG V5.7 V5.7.0.0_10.1.0.1 V5.7.0.0

S7-PLCSIM Professional V5.4 + SP8 V05.04.08.01_01.24.00.01 K5.4.8.1

SIMATIC ProSave V14.0 SP1 V14.00.01.00_12.01.00.01 V14.00.01.00

SIMATIC S7-Block Privacy Professional 2021 V1.0 + SP5 K1.0.5.0_7.1.0.1 K1.0.5.0

SIMATIC S7-GRAPH Professional 2021 V5.7 V5.7.0.0_7.1.0.4 V5.7.0.0

SIMATIC S7-Project Messages V5.7 V5.7.0.0_10.1.0.1 V5.7.0.0

SIMATIC S7-SCL Professional 2021 V5.7 V5.7.0.0_6.1.0.1 V5.7.0.0

SIMATIC S7-Web2PLC Professional 2021 V1.0 + SP3 K1.0.3.0_8.1.0.1 K1.0.3.0

SIMATIC WinCC flexible 2008 SP5 Upd2, Patch STEP 7 V5.7 Integrity K01.05.00.02_01.06.00.27 K1.5.0.2

SIMATIC WinCC flexible Runtime 2008 SP5 Upd2 K01.05.00.02_01.06.0

0.27 K1.5.0.2

STEP 7 Professional 2021 V5.7 V5.7.0.0_12.1.0.2 V5.7.0.0

 

Hello Andreywys

Do you have these problems with WinCC flexible or with Simatic Manager?

You are in the winCc flexible Conference. perhaps it would be better to make a new topic in the Simatic Manager Conference?

Bye Murof

Closed cause question posted twice.

The second thread with the subject The file RS.EXE has an invalid signature. Installation cannot be continued. is published within the conference STEP 7 / STEP 7 Lite