Mmc100 retrofit mmc103 pcu50

if your system has old MMC100 change to MMC103 --plug and Play *

if your system has old MMC100 change to PCU50--you need to replace OP031 to OP012 or OP010

together with PCU50

 General speaking NO Parameters need to set for MMC103 or PCU50

YOU ARE "fairly new to this" --so you question is TOO simple --I still NOT understand what are you doing and what is you problem

what is mean the parameters? please ask the full/detail question!!!!

840D Parameter save inside the NCU--MMC100 NO easy to lose parameters. 

MMC103 --is HMI , Parameter saved in the HDD, same as PCU50 

Cncelite

thanks for the answer 😁 I'm fairly new to this

what about the parameters?

​

 I told you--change MMC100 to MMC103--Plug N' Play --I can use the parameters from the mmc100,
i.e. the current parameters.--NO MMC100 can be used in MMC103 and NO need to use

You connect MMC103 to your NCU--if you are lucky one time sucsseful --If you NOT lucky 

send MMC103+OP display--I will guide you how to do

PS: "thanks for the answer"--if you really want to Thanks--you can use bottom "Thank" button

Hello:)

I would replace Mmc100 with mmc103 (cpu50 opo 012).
I'm fairly new to this business but I want to learn...
I'm interested in what I can change and whether.
I can use the parameters from the mmc100,
i.e. the current parameters.
In my opinion, the softwear
should also be changed because the mmc 103 is mounted from a grinding machine,
but it should be mounted on a lathe
Im asking for help