Hello, 

I have the Logo! 8/3 base module plugged into my computer directly via an ethernet cable. The IP address I have left as default from the factory: 192.168.0.3.

The first thing that is a bit off is that even when plugged in via ethernet, LSC and LWE both do not recognize any interfaces (see attachment with blank dropdown). Looking for a solution to this; not sure what the possible issues may be. I have already changed my adapter settings on my PC back to default, and have tried changing the adapter to be a specific IP on the same subnet at the PLC, but no luck in both cases. 

The second and more pressing issue is that I am able to connect using LSC, but cannot connect via LWE (see attachments). Literally nothing is different; I can be in LSC and connect, switch tabs to LWE, and then unable to connect using the LWE screens. As such, I cannot download my LWE website to the SD card on the Logo. 

Any known solutions or fixes for this? Thanks in advance for the help.

Attached is picture of network adapters.

Running as admin on both LSC and LWE yields same results as previously described. Still no adapters visible in the connection window on both LSC and LWE.

I'm not sure if I installed the applications as admin or not, but I can try uninstalling both of them and reinstalling them as admin?

I'm pretty sure both LSC and LWE were installed as admin already, but I did go ahead and uninstall them and reinstall them as admin. 

Same issue as before. No interface options available in the dropdown. Connects in LSC with 192.168.0.3 but not in LWE