i am trying to simulate control g120 at tia using standard telegram 1

i did the ladder correctly but the drive is not resoinding to any change at the run command and i cant go online with it

here is a video

Can u tell me which drive i can simulate at tia portal !

I have another question. Will the speend control word sent through profinet from 0 to 27648

afaik no drive can simulated with TIA or PLCSIM / PLCSIM Advanced.

what you mean with the second question?

Hello,

if you control drive from technology object TO_SpeedAxis, you can activate simulation mode in configuration. You have to configure hardware, but in this mode there is no need to have it physicaly connected to PLC.

PLC can send requested speed value from -100% to 100% of reference speed value in drive parameter p2000.

0..100% correspond to 0..4000h, -100%..-1% correspond to C000..FFFFh. But what is happend with values from 4001..BFFFh, I haven't tested yet on real drive..

With regards

Martin