Hours Counter "Freezes" when Trigger R (Interval Reset) from GUI Button
Created by: MacRoy at: 3/2/2023 10:49 AM (6 Replies)
Rating 
Thanks 1
7 Entries
| 3/2/2023 10:49 AM | |
|
Posts: 13 Rating:
|
Hello All I seem to have a problem resetting Hours Counter from GUI via Button. The counters operate fine and reset perfectly when Ral (Reset ALL) button is triggered but as soon as I use the R (Interval Reset) button the counters reset but then freeze the counter and I need to re-upload profile to get it working again? Would appreciate any help. Attached Profile zipped. GUI Password: password Best regards MacRoy AttachmentMacRoy Hours Counter Test V1-1.zip (415 Downloads) |
| 3/2/2023 11:35 AM | |
Joined: 12/18/2014 Last visit: 1/4/2026 Posts: 36400 Rating:
|
I have your LOGO! program and your LWE project in my LOGO! 8.3 tested. See attached screen video. AttachmentTest LWE Hour Counter.zip (465 Downloads) |
| 3/2/2023 3:38 PM | |
|
Joined: 12/18/2014 Last visit: 1/4/2026 Posts: 36400 Rating:
|
I searched in forum and found this topic: Hours Counter issue ?After reading this topic it seems so, that the error only is in the firmware V1.83.01 of the LOGO! 8.3. It seems that the error is corrected in the firmware V1.83.02. |
| 3/2/2023 3:55 PM | |
|
Posts: 13 Rating:
|
Thank you for the valuable feedback and info. I will update my firmware and try again Best regards MacRoy |
| 3/2/2023 3:57 PM | |
|
Joined: 12/18/2014 Last visit: 1/4/2026 Posts: 36400 Rating:
|
Take a look at this topic: Download links for current LOGO! software and firmwareIn this topic you will the link for the download. |
| 3/3/2023 4:19 PM | |
|
Joined: 12/18/2014 Last visit: 1/4/2026 Posts: 36400 Rating:
|
That sounds good ... And thanks for your feedback. Maybe this helps also other users ... |
Follow us on