Hi all,

is it possible to edit the log in page of the web editor?

For instance rather than seeing a picture of a Logo unit could i replace it with a company logo or a set of instructions?

Thanks

Rick

Hi Luwarick,

I think there is no possibility to make a modification of the log in page.

Hello!

What about "Pages-Create Login page" in LWE 1.1.0

Hello Luwarick

Luwarick

However when i loaded the progam into a new 8.3 module it worked and on the newer module it allowed multiple user to access the page at the same time, this i have found to be not possible with older modules.

As far as I know, it doesn't work with the current version either . I've done this before with an FS4.However, this is more of a bug. In any case, this is not intended by Siemens (unless you access the web browser via the AWS cloud).

Ella_68

(Translated with Google)

Ella_68

Hello Luwarick

Luwarick

However when i loaded the progam into a new 8.3 module it worked and on the newer module it allowed multiple user to access the page at the same time, this i have found to be not possible with older modules.

As far as I know, it doesn't work with the current version either . I've done this before with an FS4.However, this is more of a bug. In any case, this is not intended by Siemens (unless you access the web browser via the AWS cloud).

Ella_68

(Translated with Google)

Hi Ella_68,

after reading your comment about multiple user to access the page at the same time, i started to doubt myself. So i went and re checked. I can confirm that i was connected to the Logo LWE page at the same time and all displaying the same data, with my Iphone, my partners Iphone, my Ipad and also a PC. This is not an AWS project either.

An unknown bonus perhaps?

Thanks

Rick

Luwarick

An unknown bonus perhaps?

 .. not that I know of.

In any case, with 8.1 or 8.2 it ran sporadically and was not stable. Unfortunately I don't have a current version of the logo available at the moment to test it again. And in the manual there is no indication of a multiple simultaneous call. Perhaps Siemens can comment on this or you can start a support request.

Ella_68