Hi to all,

i have a S120 with CU310PN and a TO_positioning tecnology object. I have two encoder, 1) motor encoder and 2) a second encoder HTL 5000 pulses, 24Volt, no zero mark.

The second encoder data is set in the plc hardware configuration. After a download of hardware configuration and download of drive S120 parameter (with startdrive) all the data of second encoder is correct inside the online parameters of the drive. If i make upload of the drive parameters, in the hardware configuration i found the second encoder with 1024 pulse, no power supply and zero mark parameters wrong. It seems upload of the second encoder doesn't work correctly.

I have TIA18.

Do you know which is the reasons?

Many thanks. 

Hello,

when online parameter are correct, and then you did RamTORom on the drive, the Upload schould work fine.

Hi,

i have a video that show to you the problem, the size is 12MB zip. How i can upload it (max size is 8MB)?

Many thanks.

Hi,

here the link with the video. Many thanks.

[snip]