You need to have a floppy disk (3.5") with DR DOS system. , Loptop with adptor connect to Flopyy drive and insert 840C HDD to the loptop HDD position, booting from flopyy , then SYS *.* C /S

ya mahdi

Hello.
I have an 840c controller. with software:
DR DOS V6.0
VALITEK SW + INSTALLATION TOOLS
The system does not boot due to hard drive failure. After turning on the controller, the system remains in loading mode and does not start up.
To solve the problem, I want to replace the new hard drive. I have already taken a hard image with Ghost software. But unfortunately, by uploading the archive to the new hard drive, the system does not boot up through the ghost software. Please guide me how should I upload the image so that the system will be up?

------------------------------------------------------------------------------------------
Split from need DR DOS V6 and valitek sw for 840C.