Rating 
Thanks 0
3 Entries
| 5/23/2023 1:00 PM | |
Joined: 4/28/2015 Last visit: 11/27/2025 Posts: 10970 Rating:
|
Hello, if I good understand your situation, this kind of HW requires Simatic NET some version which contains also driver. In this case You need look at Simatic NET SW version suitable to your card and OS as requirements. Check your CP and then Simatic NET manuals with versions. Hope this is correct procedure. Look at this link: Simatic NET CP1613 A2 Operating instructions |
Last edited by: Duris_I at: 05/23/2023 13:01:28Last edited by: Duris_I at: 05/23/2023 13:02:13Last edited by: Duris_I at: 05/23/2023 13:07:00With best regards... |
|
| 5/25/2023 11:45 AM | |
Joined: 8/3/2009 Last visit: 12/19/2025 Posts: 16612 Rating:
|
Hello a.z.r It is released for this OS: https://support.industry.siemens.com/cs/ww/en/view/23785421 So generally it should work. Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on