Dec, hello! How you configured the SFC14/15 to read/write the parameters from AC?

Dec

You have to install the gsd file in HW Config (Options->Install GSD File...).
You will find the slave under PROFIBUS DP/Additional Field Devices/General/Profi2Can
Drag/Drop on an existing DP Master Network and configure the I/O.
Remember that CPU read/write data consistent up to 4bytes(DWORD).
If you configure a length over this size with consistency total length you have to use SFC14/15

Happy Holidays
Dec

------------------------------------------------------------------------------------------
Split from Configuration of an Atlas Copco ComBox-P as DP slave.

Closed cause question posted twice.

The second thread with the subject PB Communication from Atlas Copco Compressor via MK5 and CPU-400 is published within the conference Decentral Peripherie.