Hello! I have a similar problem, a foreign project TP177A does not have the password. I don't know the Flexible version either. Any version will do?

​

Ayman Elotaify

 

matiar

HI

THANK YOU FOR HELP

which version should i use prosave?
I have a packaging machine . that controlled with operator panel ( TP177A).
When i will change a parameter with tp177a, that need username & password , but i forgot all username & passwords.
how can i bypass or reset all user & passwords on the tp177a?
also, i have not project source file .
please help me

best regards

matiar

 Dear matiar,

Please do the following steps:

1. Upload an image from your panel and save it on your PC. (Upload File # 1)
2. Create a simple project using WinCC flexible and create a password using Runtime User Adminstration menu.
3. Download the project to your panel. It will overwrite the existing project.
4. Then Using Prosave, Go to backup menu and select User Adminstration in the data type drop menu.
5. Save the uploaded file on your PC. (Upload File # 2)
6. Then start to download the file uploaded in step 1 "(Upload File # 1)"
7. After finishing, Start to download the user adinistration you have created "(Upload File # 2)". It will overwrite the password list with the new password you have created in the wincc flexible project.

This way is tested and worked. It should work.

Please give me your feedback if you faced any obstacles.

Hope this helps.

------------------------------------------------------------------------------------------
Split from How can reset or bypass all user and passwords in tp177a?.