Hello,

Is there an option or any way to disable the USB ports for TP1200?

customer has strange requirements to meet some EU-GMP standards. I've looked into this and I didn't find anything related to this. 

Any help will be appreciated

Thank you,

Hi Zer0,

Unfortunately, this is not possible with the panels themselves. However, there is an addon called HMI Simatic Option+ that can be used to disable the USB-ports. How to install Option+ on the panel and disable the ports can be found in the following application example, you can try it:

SIMATIC HMI Option+

Hi Zer0,

I think you can do that using the SIMATIC HMI Option+ tool for panels.

Please refer to the page 57 of the PDF you can find within following link:

https://support.industry.siemens.com/cs/de/en/view/109754400

I hope you find this information useful.

Best regards,

Cocolino

 Thank you very much for the reply. I will check this out and report back.

Hazard_7

Hi Zer0,

Unfortunately, this is not possible with the panels themselves. However, there is an addon called HMI Simatic Option+ that can be used to disable the USB-ports. How to install Option+ on the panel and disable the ports can be found in the following application example, you can try it:

SIMATIC HMI Option+