Dear all,

I have HMI model TP177B DP-6 MSTN 6AV6 642-0BC01-1AX1, I want to backup and restore in ProSave, so What model cable can I use?  I'm going to buy PC adapter usb model 6ES7 972-0CB20-0XA0, will it work fine? 

waiting for reply

Thanks

Hi AutoGen_1894858,

To make the backup to the TP 177B 6" DP panel you can use the following cables:

• SIMATIC S7-200, PC/PPI Cable mm
  
• S7 MPI Cable, 5m
  
• 90 degree bracket adapter, 1:1
  
• DP PtP 6XV1 830-0Axxx
• DP Standard (Standard Profibus, 2-pin)
• USB (Host-to-Host)

Hazard_7

Hi AutoGen_1894858,

To make the backup to the TP 177B 6" DP panel you can use the following cables:

• SIMATIC S7-200, PC/PPI Cable mm
  
• S7 MPI Cable, 5m
  
• 90 degree bracket adapter, 1:1
  
• DP PtP 6XV1 830-0Axxx
• DP Standard (Standard Profibus, 2-pin)
• USB (Host-to-Host)

 thank for your help,

I have another question, i just found out when turn on HMI, in screen display model TP177A but model in the back is TP 177B 6" DP;  I open inside HMI and see only 1 port MPI/PROFIBUS. I search  manual TP 177B , it has port MPI; usb and SD card. I'm really confused, how can i determine which model it is?

Hi AutoGen_1894858,

I had never heard such a thing, can you attach images? If I remember correctly in the Sytem control panel you will see the exact model.