Hello everybody,

I am doing an installation of a new system with a S7-1215C and a pneumatic island Festo CTEU-PN on TIA V18. When I load the program to the PLC and I go online, I have an issue on the pneumatic. The FW of my GSDML file is 2.1 and the FW physically in the pneumatic island is 2.2...

I do not find the V2.2 gsdml file from Festo...

I already did it on TIA V15.1 and all was ok. I can't confirm that the FW could be different because all worked on the system...

Do you have any idea of where I could have done a mistake ?

Thank you for your help,

CBB.

Closed cause question posted twice.

The second thread with the subject Festo gsdml CTEU-PN file FW issue on S7-1200 is published within the conference Communication / Networks.