Translate from the Russian text, with Google Translate.

Marsov1ch

Good afternoon.  Can you help me?

I have an S7-412-3H processor which then connects to the ET200M module.  there on the bus I have analog modules with HART support, I have flow meters and I would like to output data via HART through this module.  How can I do it?  right from the start?  I have STEP7 installed, I’m not a specialist, but I can work with simple analog and discrete signals.  thank you in advance

 

Hello Marsovich;

To make exchanges easier for participants from many countries who participate in the Siemens forum, we have chosen English as a common language. Please ask your questions in English on your next visit.

The best recommendation i can provide  to learn aout HART modules on a Profibus network is to look at the Siemens documentation on HART modules:

-  HART analog modules, equipment manual:

https://support.industry.siemens.com/cs/kz/ru/view/22063748

-  PROFIBUS: Field Automation with PROFIBUS in the process industry

https://support.industry.siemens.com/cs/ca/en/view/90880058

Unfortnately, these are available only in English, German, French, Spanish and Chinese versions, no Russian. I hope they can still help you out. As you can see in the attached screenshot, you would need either Step 7 or PCS 7 to program the PLCs and configure the HART modules, and PDM software to parameterize the HART modules for operation.

The forum does not allow mwe to attach a file right now, look on page 35 of the first document proposed to see the requirements to introduce a HART module on a ET 200M remote I/O system.

Hope this helps,

Daniel Chartier