4/25/2024 10:38 PM | |
Joined: 7/7/2010 Last visit: 8/30/2024 Posts: 15125 Rating:
|
Perhaps this link will help you: https://support.industry.siemens.com/cs/mdm/109741593?c=90613046795&lc=en-LT Which LED status matches the conditions you are seeing? I cannot tell from your description.
|
science guy |
|
4/26/2024 6:38 AM | |
Joined: 2/4/2023 Last visit: 7/18/2024 Posts: 5 Rating:
|
stuck on Startup
|
4/26/2024 12:28 PM | |
Joined: 2/4/2023 Last visit: 7/18/2024 Posts: 5 Rating:
|
Here is a video AttachmentWhatsApp Video 2024-04-26 at 15.16.22_86ef8a0e.wmv (91 Downloads) |
4/26/2024 1:19 PM | |
Joined: 7/7/2010 Last visit: 8/30/2024 Posts: 15125 Rating:
|
The "Startup" LED status has all 3 of these potential reasons for the same indications:
Is there a memory card in the PLC? If so, power the PLC off and remove it.
|
science guy |
|
Follow us on