Hi,

I have the same issue with my RF160C.

I try to reset it with a RF160C_RESET bloc but I it's giving error code : 1500

This error code is "Wrong parameterization of the RF160C"

I use a Byte 122 IN/OUT module and my ID's are 264 and 265.

I use 122 as GSD_IO

Would you have an idea of what i'm doing wrong ?

Thank's

------------------------------------------------------------------------------------------
Split from Trying to reset the RF160C but its giving error code: 1500.

Hi,

which reader(s) are connected to the RF160C (for the 2 reader modules)? Please add the selected settings/properties of RF160C. What'S the source for the RF160C_reset block?

I have a RF220R on X1 and nothing on X2.

I have the RF160C_RESET bloc from 63969277_rf160c_s71200_1500_v14_lib_v16

Documentation about the lib : 63969277_RF160C_S71200_1500_TIA_V11_en.pdf (siemens.com)

I didn't change the properties of the RF160C, I join a capture of the properties.

Thank's

Good morning,

if your're using a RF220R field_on_time needs to be 1 (maybe we're lucky and that's all).

Good morning,

Thank you for your help it works !

Can you explain what is field_on_time, I find nothing about that ?

Thank's

Hi,

the setting determins the RFID transponder. RF200 only supports one type. All of the settings can be found in the manual (chapter 5.2 "Parameter setting by means of GSD file")