ghader

 

unknown user

 

 

Hello All,

Did any one get the solution for this panel booting problem? Actually i am facing the same problem in TP700 Comfort panel.

Is any other way to restore the panel without sending to service center?

kindly suggest.

ghader hasanpoor

mr_ovchinnikov

Hello,

The OS and the working project are not loaded on the TP700 Comfort operator panel (6AV2 124-0GC01-0AX0).

When the power is turned on, the panel displays the initial screen with the inscription "SIMATIC HMI", runs through several squares meaning the download, that's all.

See the photo.

The operating system does not load. The panel was working with a working project, stood on the site, worked for more than 2 years.

With the panel no action was taken, the picture was lost, and no longer loaded.

I tried to boot the OS via TIA Portal and through Simatic ProSave. I tried various interfaces MPI / Profibus DP, Ethernet, USB. When trying to find the panel, the messages "No accessible device found in selected network" and "Scan completed. 0 compatible device of 0 accessible devices found ".

Tell me, what can I do?

 

Hello, can you explan the solution? 

Thanks.