Berg

Hello,

I have one CPU 315-2 PN/DP and I´d like to know howcan I assign a dynamic address to Ethernetvia DHCP ?


Greetings !

lalit

I don't think it might possible, I think you have manual of this, u can find the technical infohere.

And you can find the manualhere

Requirement / Restriction:

If you select this option, it is initially not possible to create a fully specified connection in the STEP 7 project because the local IP address is not known.

You must therefore select “unspecified” with passive connection establishment as the connection type.

edr

Hello,
The CP343-1 can have a dynamic IP via DHCP.

Requirement / Restriction:

If you select this option, it is initially not possible to create a fully specified connection in the STEP 7 project because the local IP address is not known.

You must therefore select “unspecified” with passive connection establishment as the connection type.