Hello everyone

i have the following issue.

device found in proneta but not in tia portal.

I have never made connection with this plc before.

i hope to do a upload of the program.

I am connected directly at the port of de controller.

Controller :

S7-1500 6ES7 512-1DK01-0AB0

Firmware : V2.8.3

Hardware rev: 7.

IP: 192.168.0.20

PC's:

Siemens PG M5 win 10

Toshiba Win 8

i've tried simens M5:

-Proneta Does find the all the devices.

-i have set my IP correctly and can ping.

-Tia portal V17 basic = No accesible devices not even in the online acces.

-Tia portal V15.1 basic = No accesible devices not even in the online acces.

-Tia portal V16 basic = No accesible devices not even in the online acces.

-Tia portal V14 basic = No accesible devices not even in the online acces.

i've tried simens toshiba:

-Proneta Does find the all the devices.

-i have set my IP correctly and can ping.

-Tia portal V15 Professional= No accesible devices not even in the online acces.

-Tia portal V15.1 basic = No accesible devices not even in the online acces.

-Tia portal V12 basic = No accesible devices not even in the online acces.

Do you guys have any ideas ? 

Thank you in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi!

Have you checked the PG/PC interface settings?

Swarley92

Hi!

Have you checked the PG/PC interface settings?

 Hello Thanks for the response.

Today i tried again and without changing anything i found the device like nothing happend.

I start the pc plug in the utp start tia V15->make new project->open upload station as new...

And form the first scan there they where all the profinet device's.

very strange i did the same steps as before only this time i didn't use proneta first.

but thanks again i wil check out that link :p