Hello, my ES was already configured as a Client within the WinCC project, my IE General card associated to the plantbus network and the download of the configurations and connections were carried out successfully to the ES, as seen in the image, section 7.

My problem is when I want to download to the OSS (Server), despite having made the configuration and it has been successful, it does not let me download the connections or the configurations that are in NetPro.

The configuration of the IE General card of my OSS (Server) is also within the Planbus network, as I mentioned and it can be seen in section 1 of the image, the configuration went well, but it does not let me download what I mentioned.

If it lets me download the wincc project without problem, but when I right click on my station /PLC / download, I get this error: The Connection to the target module cannot be established" and then I get "Unable to establish connection to module StationManager (Index125)"

Techno_Taru

Hello Cristian,

The below steps/configuration may help you to resolve the downloading issue using "PC Internal Local"

• Configure your ES as client in your multiproject (WinCC application client and IE general should be configured to plant bus)
• Configure and Download the ES machine from component view with "PCS Internal Local"

From now onwards, you don't see and download issues.

I hope it may help you!

Hello everyone.

I partially solved my problem as follows:

1. From the engineering station, I selected my OSS, PLC/Configure and waited for the procedure to finish.

2. I didn't download the file as it should normally be, instead what I did was right click on my OSS / Object Properties / Configuration. In that option, I copied the .xdb file and pasted it into a folder in my OSS.

3. Already with the .xdb file in my OSS, I opened the Station Configuration Editor and then I clicked on import station, I searched for the .xdb file and everything was fine.

With this procedure done, my OSS would have what I need but...

My questions are:

Why is this .xdb file not being transferred?

What is missing so that when you give PLC / Download, this file is transferred?

It was a long time ago you had the problem, but I had the same. 

My problem was that the VM was created with a slightly different IP from the physical machine. When I edited my project and used the correct IP the problem was solved. So check all the network before do any of those steps. 

more clarify pls .. thank u

how u create a folder in oos ?