Hello good people of this forum,

I have a question about status of profinet devices, maybe some of yall can help me.

In my PLC program i would like to put value of state of profinet device into a tag, for example if my IO module IM 155-6 is ok and green in HW configuration, i want to put 1 in the tag or any value that will say that its ok, same for PN/PN Coupler.

I have already tried DeviceStates block but its not working for PN/PN coupler.

Here is example how i solved this issue for PLC, i am basically checking just LED states of the PLC, that should give me enough info about the device.

Have a good one

Martin