Did you solved your issues ? 

I have the same after I changed Device version from V17.0.0 to V18.0.0

I have a PLC1500 and use Runtime on PC: I need to read a write on the pLc1500 data set of recipe but when I read everything working in the write procedure we have a message: operation interrupted. I checked the parameters of DB and it's correct with write permission and check I checked the user permission and saw everything okay.

Can someone suggest some control? Thank you 

Hello, I’m facing the same issue and I’m exhausted from trying to find a solution. I have an active user called “User” who only has “HMI Administrator” and “HMI Operator” access. I confirmed I’m connected as “User” at runtime by checking the #UserName value. I set the PLC password as advised by @D.Josic, but I can still only change BOOL values when editing IO fields. Does anyone have another solution? I’m on V19.

Thank for your share! I spent about 5hrs to solve this problem and finally success thank to your help

I changed the user access as suggested but issues still there. Not sure what is the solution for this issue. I'm using v20 and whe I trigger the bit from the PLC side it shows on the WinCC but the IO doesn't work. 

 Hello 

MustafaAttwan

I changed the user access as suggested but issues still there. Not sure what is the solution for this issue. I'm using v20 and whe I trigger the bit from the PLC side it shows on the WinCC but the IO doesn't work. 

Have you set the input/output mode for the IO field?

If so, please describe your problem in more detail.

Maybe you can send a screenshot, that would be helpful.

Best regards, Costanza