Olá, Sou o Filipe e tenho 40 anos, estou a precisar de ajuda ando a algum tempo a ver vídeos e a ler,  não estou a conseguir aplicar no software da logo soft, no programa ZelioSoft consigo mas não e possível enviar para o logo !

o programa consiste em que mande 1pulso de 1 segundo de forma alternada para as 4 saídas, como por exemplo um pisca pisca de forma alternada durante 1 segundo.

preciso de alimentar 2 bobines independentes durante 1 segundo, de forma a não sobrecarregar o logo, vou usar 2 saídas para cada bobine. ex: bobine1 (saída 1,3) Bobine2 (saída 2,4).

estou a usar o logo Soft versão 8,4

agradeço a quem poder ajudar, abraço

Hello AutoGen_5ead1,

English is the desired language in this forum. Please be so kind and write your posts in English.
Thanks.

Translate to English: 

AutoGen_5ead1

Hello, I'm Filipe and I'm 40 years old. I need help. I've been watching videos and reading for a while now. I can't apply it to the logo soft software. I can use the ZelioSoft program, but it's not possible to send it to the logo!

The program consists of sending 1 pulse of 1 second alternately to the 4 outputs, such as a blinking light alternately for 1 second.

I need to power 2 independent coils for 1 second, so as not to overload the logo. I'm going to use 2 outputs for each coil. For example: coil1 (output 1,3) Coil2 (output 2,4).

I'm using Logo Soft version 8.4

I'd like to thank anyone who can help. Best regards

First, you should write down which LOGO! model you have.
Please write the exact order number of your LOGO!

Hello, I'm Filipe and I'm 40 years old. I need help. I've been watching videos and reading for a while now. I can't apply it to the logo soft software. I can use the ZelioSoft program, but it's not possible to send it to the logo!

The program consists of sending 1 pulse of 1 second alternately to the 4 outputs, such as a blinking light alternately for 1 second.

I need to power 2 independent coils for 1 second, so as not to overload the logo. I'm going to use 2 outputs for each coil. For example: coil1 (output 1,3) Coil2 (output 2,4).

I'm using Logo Soft version 8.4, and the model logo is logo 12/24RC

I'd like to thank anyone who can help. Best regards

ixo65

Please write the exact order number of your LOGO! 

Hello,

Something like this you whant?

B002 is Asynchronous Pulse Generator