Hello, I need help. I created custom buttons on the simulator - everything worked. I transferred these files to the machine, but when I press them, nothing happens. The command wnp does not overwrite the variables. What could be the problem?

Hi

Can you share the . com file you've generated so the community can review it?

Many thanks 

Luke

HI

;------------------

//S(Start)

HS8=(["TEST", "\\test.png"])

PRESS(HS8)
    LM(TEST)
END_PRESS
    
//END

//M(TEST)

HS1=("T1")
HS2=("T2")

PRESS(HS1)
    WNP("DB11.DBX0.0",1);switching to automatic mode
    SP("//NC/WKS.DIR/TEMP.WPD/T1.MPF");program selection
    WNP("DB21.DBX7.1",1);start of the program
END_PRESS

PRESS(HS2)
    WNP("DB11.DBX0.0",1);switching to automatic mode
    SP("//NC/WKS.DIR/TEMP.WPD/T2.MPF");program selection
    WNP("DB21.DBX7.1",1);start of the program
END_PRESS

//END

;------------------

All buttons are displayed, but when pressed, only the program is selected, without switching to automatic mode and starting. These system variables on my machine were under different addresses. I tried to change them, but also, nothing happened.

Thanks for the reply. 

Yes, I agree about starting the program manually. 

And how to change the PLC program and use the user base signal. Can you elaborate a bit on this? 

Thanks for your help.

The buttons created by the manufacturer also do not work.
It turns out that the machine does not have a license "Run MyScreens". Isn't it basic and how to fix it? 

Thank you.

Are there any tutorials on how to make your own db marker? I couldn't find any online after a quick search. 

Thanks again.